2013年12月9日星期一

70-417 dernières questions d'examen certification Microsoft et réponses publiés

Il y a beaucoup de gans ambitieux dansn l'Industrie IT. Pour monter à une autre hauteur dans la carrière, et être plus proche du pic de l'Industrie IT. On peut choisir le test Microsoft 70-417 à se preuver. Mais le taux du succès et bien bas. Participer le test Microsoft 70-417 est un choix intelligent. Dans l'Industrie IT de plus en plus intense, on doit trouver une façon à s'améliorer. Vous pouvez chercher plusieurs façons à vous aider pour réussir le test.

Le guide d'étude de Pas4Test comprend l'outil de se former et même que le test de simulation très proche de test réel. Pass4Test vous permet de se forcer les connaissances professionnelles ciblées à l'examen Certification Microsoft 70-417. Il n'y a pas de soucis à réussir le test avec une haute note.

Le test Microsoft 70-417 est le premier pas pour promouvoir dans l'Industrie IT, mais aussi la seule rue ramenée au pic de succès. Le test Microsoft 70-417 joue un rôle très important dans cette industrie. Et aussi, Pass4Test est un chaînon inevitable pour réussir le test sans aucune doute.

Pour réussir le test Microsoft 70-417 demande beaucoup de connaissances professionnelles IT. Il n'y a que les gens qui possèdent bien les connaissances complètes à participer le test Microsoft 70-417. Maintenant, on a les autres façons pour se former. Bien que vous n'ayez pas une connaissance complète maintenant, vous pouvez quand même réussir le test Microsoft 70-417 avec l'aide de Pass4Test. En comparaison des autres façons, cette là dépense moins de temps et de l'effort. Tous les chemins mènent à Rome.

Le Certificat de Microsoft 70-417 peut vous aider à monter un autre degré de votre carrière, même que votre niveau de vie sera amélioré. Avoir un Certificat Microsoft 70-417, c'est-à-dire avoir une grande fortune. Le Certificat Microsoft 70-417 peut bien tester des connaissances professionnelles IT. La Q&A Microsoft 70-417 plus nouvelle vient de sortir qui peut vous aider à faciilter le cours de test préparation. Notre Q&A comprend les meilleurs exercices, test simulation et les réponses.

Si vous voulez ne se soucier plus à passer le test Microsoft 70-417, donc vous devez prendre la Q&A de Pass4Test comme le guide d'étude pendant la préparation de test Microsoft 70-417. C'est une bonne affaire parce que un petit invertissement peut vous rendre beaucoup. Utiliser la Q&A Microsoft 70-417 offerte par Pass4Test peut vous assurer à réussir le test 100%. Pass4Test a toujours une bonne réputation dans l'Industrie IT.

Les produits de Pass4Test sont préparés pour le test Certification Microsoft 70-417, y compris les formations et les informations ciblées au test Microsoft 70-417. D'ailleurs, la Q&A de Pass4Test qui est impressionnée par la grande couverture des questions et la haute précision des réponses vous permet à réussir le test avec une haute note.

Code d'Examen: 70-417
Nom d'Examen: Microsoft (Upgrading Your Skills to MCSAWindows Server 2012)
Questions et réponses: 246 Q&As

70-417 Démo gratuit à télécharger: http://www.pass4test.fr/70-417.html

NO.1 Your network contains an Active Directory domain named contoso.com. The domain contains
two
member servers named Server1 and Server2 that run Windows Server 2012. You log on to Server1.
You
need to retrieve the IP configurations of Server2.
Which command should you run from Server1?
A. dsquery * -scope base -attr ip,server2
B. winrs -r:server2 ipconfig
C. winrm get server2
D. ipconfig > server2.ip
Answer: B

Microsoft   70-417   70-417 examen   70-417 examen   70-417 examen   70-417

NO.2 Your network contains an Active Directory domain named contoso.com. All servers run either
Windows
Server 2008 R2 or Windows Server 2012. All client computers run either Windows 7 or Windows 8.
The
domain contains a member server named Server1 that runs Windows Server 2012. Server1 has the
File
and Storage Services server role installed. On Server1, you create a share named Share1. You need
to
ensure that users can use Previous Versions to restore the files in Share1.
What should you configure on Server1?
A. A data recovery agent
B. The Shadow Copies settings
C. The Recycle Bin properties
D. A Windows Server Backup schedule
Answer: B

Microsoft examen   70-417   certification 70-417   70-417

NO.3 You have a server named Server1 that runs Windows Server 2012. Server1 has the Hyper-V
server role
installed.
Server1 is connected to two Fibre Channel SANs and is configured as shown in the following table.
You have a virtual machine named VM1. You need to configure VM1 to connect to SAN1.
What should you do first?
A. Create a virtual Fibre Channel SAN.
B. Configure network adapter teaming.
C. Add one HBA.
D. Create a Hyper-V virtual switch.
Answer: A

certification Microsoft   certification 70-417   70-417 examen   70-417

NO.4 Your network contains an Active Directory domain named contoso.com. The domain contains
two
domain controllers named DC1 and DC2. You install Windows Server 2012 on a new computer
named
DC3. You need to manually configure DC3 as a domain controller.
Which tool should you use?
A. winrm.exe
B. Server Manager
C. dcpromo.exe
D. Active Directory Domains and Trusts
Answer: B

Microsoft examen   70-417   70-417

NO.5 You have a server named Server 1 that runs Windows Server 2012. Server1 has five network
adapters.
Three of the network adapters are connected to a network named LAN1. The two other network
adapters
are connected to a network named LAN2. You create a network adapter team named Team1 from
two of
the adapters connected to LAN1. You create a network adapter team named Team2 from the two
adapters connected to LAN2. A company policy states that all server IP addresses must be assigned
by
using a reserved address in DHCP. You need to identify how many DHCP reservations you must
create
for Server1.
How many reservations should you identify?
A. 2
B. 3
C. 5
D. 7
Answer: B

Microsoft examen   70-417 examen   70-417 examen   70-417 examen

NO.6 Your network contains an Active Directory domain named contoso.com. All domain controllers
run
Windows Server 2008 R2. One of the domain controllers is named DC1. The network contains a
member
server named Server1 that runs Windows Server 2012. You need to promote Server1 to a domain
controller by using install from media (IFM).
What should you do first?
A. Create a system state backup of DC1.
B. Run the Active Directory Domain Services Installation Wizard on DC1.
C. Run the Active Directory Domain Services Configuration Wizard on Server1.
D. Create IFM media on DC1.
E. Upgrade DC1 to Windows Server 2012.
Answer: E

Microsoft examen   70-417   70-417

NO.7 Your network contains an Active Directory domain named contoso.com. The domain contains
two
domain controllers.
The domain controllers are configured as shown in the following table.
In the perimeter network, you install a new server named Server1 that runs Windows Server 2012.
Server1 is in a workgroup. You need to perform an offline domain join of Server1 to the
contoso.com
domain.
What should you do first?
A. Run the djoin.exe command.
B. Run the dsadd.exe command.
C. Transfer the PDC emulator role to DC1.
D. Transfer the infrastructure master role to DC1.
Answer: A

certification Microsoft   70-417   certification 70-417   70-417 examen   70-417 examen

NO.8 Your network contains an Active Directory domain named contoso.com. The domain contains
a server
named Server1 that runs Windows Server 2012. On a server named Server2, you perform a Server
Core
Installation of Windows Server 2012. You join Server2 to the contoso.com domain. You need to
ensure
that you can manage Server2 by using the Computer Management console on Server1.
What should you do on Server2.?
A. Run the Disable-NetFirewallRulecmdlet.
B. Run the Enable-NetFirewallRulecmdlet.
C. Run sconfig.exeand configure the network settings.
D. Run sconfig.exeand configure remote management.
Answer: B

Microsoft examen   certification 70-417   70-417   70-417 examen

NO.9 Your network contains an Active Directory domain named contoso.com. The network
contains a server
named Server1 that runs Windows Server 2012 and a server named Server2 that runs Windows
Server
2008 R2 Service Pack 1 (SP1). Server1 and Server2 are member servers. You need to ensure that you
can manage Server2 from Server1 by using Server Manager.
Which two tasks should you perform? (Each correct answer presents part of the solution. Choose
two.)
A. Install Windows Management Framework 3.0 on Server2.
B. Install Remote Server Administration Tools on Server1.
C. Install the Windows PowerShell 2.0 engine on Server1.
D. Install Microsoft .NET Framework 4 on Server2.
E. Install Remote Server Administration Tools on Server2.
Answer: AD

certification Microsoft   70-417   70-417

NO.10 You have a file server named Server1 that runs Windows Server 2012. Server1 has following
hardware
configurations: ¡è 16 GB of RA ¡è A single qu-core CP ¡è Three network teams that have two
network
adapters each You add additional CPUs and RAM t Server1. You repurpose Server1 as a
virtualization
host. You install the Hyper-V server role on Server1. You need to create four external virtual
switches in
Hyper-V.
Which cmdlet should you run first?
A. Add-VMNetworkAdapter
B. Add-NetLbfoTeamNic
C. Set-NetAdapter
D. Remove- NetLbfoTeam
Answer: D

Microsoft examen   70-417   70-417   70-417   70-417   70-417 examen

Le succès n'est pas loin de vous si vous choisissez Pass4Test. Vous allez obtenir le Certificat de Microsoft 70-417 très tôt. Pass4Test peut vous permettre à réussir 100% le test Microsoft 70-417, de plus, un an de service en ligne après vendre est aussi gratuit pour vous.

没有评论:

发表评论