Il y a beaucoup de gans ambitieux dansn l'Industrie IT. Pour monter à une autre hauteur dans la carrière, et être plus proche du pic de l'Industrie IT. On peut choisir le test Microsoft MB7-514 à se preuver. Mais le taux du succès et bien bas. Participer le test Microsoft MB7-514 est un choix intelligent. Dans l'Industrie IT de plus en plus intense, on doit trouver une façon à s'améliorer. Vous pouvez chercher plusieurs façons à vous aider pour réussir le test.
Pass4Test est un site d'offrir l'outil de formation convenable pour les candidats de test Certification IT. Le produit de Pass4Test peut aider les candidats à économiser les temps et les efforts. L'outil de formation est bien proche que test réel. Vous allez réussir le test 100% avec l'aide de test simulation de Pass4Test. C'est une bonne affaire à prendre le Certificat IT en coûtant un peu d'argent. N'hésitez plus d'ajouter l'outil de formation au panier.
Dans cette société bien intense, c'est avantage si quelque'un a une technique particulère, donc c'est pourquoi beaucoup de gens ont envie de dépnenser les efforts et le temps à préparer le test Microsoft MB7-514, mais ils ne peuvaient pas réussir finalement. C'est juste parce que ils ont pas bien choisi une bonne formation. L'outil de formation lancé par les experts de Pass4Test vous permet à passer le test Microsoft MB7-514 coûtant un peu d'argent.
Dans cette société de plus en plus intense, nous vous proposons à choisir une façon de se former plus efficace : moins de temps et d'argent dépensé. Pass4Test peut vous offrir une bonne solution avec une plus grande space à développer.
Code d'Examen: MB7-514
Nom d'Examen: Microsoft (NAV 5.0 C/SIDE Introduction)
Questions et réponses: 104 Q&As
MB7-514 Démo gratuit à télécharger: http://www.pass4test.fr/MB7-514.html
NO.1 Which Data Type is best for storing whole numbers in a table, especially when there are
database size limitations?
A.BLOB
B.Integer
C.Decimal
D.Code
Correct:B
Microsoft MB7-514 MB7-514 examen MB7-514 MB7-514
NO.2 Using standard navigation in Microsoft Dynamics NAV, pick the three options to access the
ledger form from a card form.
A.Pressing Ctrl+F5, selecting the Ledger Entries menu item, or selecting the Drilldown button on a
flowfield.
B.Pressing Ctrl+F5, selecting the Ledger Entries menu item, or selecting the Lookup button on the tool
bar.
C.Pressing the F5 key, selecting the Ledger Entries menu item, or selecting the Drilldown button on a
flowfield.
D.Pressing the F5 key, selecting the Ledger Entries menu item, or selecting the Lookup button on the tool
bar.
Correct:A
Microsoft MB7-514 MB7-514 examen MB7-514 MB7-514
NO.3 Into which table are the Journal Entries made for the Sales & Receivables Functional Area?
A.Cust. Journal Line
B.Cash Rec. Journal Line
C.Gen. Journal Line
D.Receivables Journal Line
Correct:C
Microsoft MB7-514 MB7-514 examen MB7-514 MB7-514
NO.4 Which property is used to define a table relationship?
A.TableConstraint
B.RelateField
C.DataItemLink
D.TableRelation
Correct:D
Microsoft MB7-514 MB7-514 examen MB7-514 MB7-514
NO.5 Which of the following best describes Tab Controls?
A.Tab controls can only contain one tab, named General.
B.Tab controls must contain a tab named General. Any additional names are specified using the
NewTabName property.
C.Tab controls can contain multiple tabs; the names of which are specified using the MultipleTab property.
D.Tab controls can contain multiple tabs; the names of which are specified using the PageNames property.
Correct:D
Microsoft MB7-514 MB7-514 examen MB7-514 MB7-514
NO.6 What field property will cause a lookup form to be displayed when the F6 key is pressed?
A.OptionString
B.Lookup
C.TableRelation
D.ValuesAllowed
Correct:C
Microsoft MB7-514 MB7-514 examen MB7-514 MB7-514
NO.7 In the Microsoft Dynamics NAV application, which of these table types will have the most
trigger code (within a single Functional Area)? In other words, which type of table usually has the
most business rules?
A.Master table
B.Supplemental table
C.Journal table
D.Ledger table
Correct:C
Microsoft MB7-514 MB7-514 examen MB7-514 MB7-514
NO.8 Which of the following Functional Areas has more than one Master Table?
A.General Ledger
B.Fixed Assets
C.Inventory
D.Sales & Receivables
Correct:B
Microsoft MB7-514 MB7-514 examen MB7-514 MB7-514
NO.9 A table description contains the following:
A.Properties, Triggers, Fields, and Keys.
B.Names, Fields, Keys, and Forms.
C.Properties, Data, Fields, and Keys.
D.Data and Keys.
Correct:A
Microsoft MB7-514 MB7-514 examen MB7-514 MB7-514
NO.10 When is it possible to change the name of a field in a table?
A.You must first delete the data from the field in all records in the table before changing the field name.
B.You must first remove all references to the field in other tables, forms, and reports.
C.You can always change the name of a field in a table.
D.You can never change the name of a field in a table.
Correct:C
Microsoft MB7-514 MB7-514 examen MB7-514 MB7-514
NO.11 Which are the valid "parts" of a table in Microsoft Dynamics NAV?
A.Data and Legs
B.Data and Properties
C.Data and Description
D.Source and Description
Correct:C
Microsoft MB7-514 MB7-514 examen MB7-514 MB7-514
NO.12 A SumIndexField is a field that can be attached to a key definition. Which of the following are
accurate characteristics of a SumIndexField?
A.A SumIndexField can be any data type and can be attached to any key in the table.
B.A SumIndexField must be a decimal field and can be attached to any key in the table.
C.A SumIndexField must be a decimal field and can only be attached to the primary key.
D.A SumIndexField can be any data type and can only be attached to the primary key.
Correct:B
Microsoft MB7-514 MB7-514 examen MB7-514 MB7-514
NO.13 Which of the following characteristics are not a result of table relationships?
A.Validate data entries.
B.Optimize table records.
C.Perform Lookup in other tables.
D.Automatically propagate changes from one table to other tables.
Correct:B
Microsoft MB7-514 MB7-514 examen MB7-514 MB7-514
NO.14 What is the Master Table for the Cash Management Functional Area in Microsoft Dynamics NAV?
A.Customer
B.G/L Account
C.Cash Account
D.Bank Account
Correct:D
Microsoft MB7-514 MB7-514 examen MB7-514 MB7-514
NO.15 What happens if you set the Editable property of a field in a table to "No"?
A.The field will not be modifiable, whether you use a form or C/AL code.
B.You will not be able to modify the field using C/AL code, but you can still modify it using a form.
C.You will not be able to modify the field using a form, but you can still modify it using C/AL code.
D.The field will not be able to be used on forms.
Correct:C
Microsoft MB7-514 MB7-514 examen MB7-514 MB7-514
NO.16 You have a table in which the user makes journal entries. According to Microsoft Dynamics
NAV standards, what type of form is used with this table?
A.List Form
B.Card Form
C.Worksheet Form
D.Tabular Form
Correct:C
Microsoft MB7-514 MB7-514 examen MB7-514 MB7-514
NO.17 What is the maximum number of fields that can be contained in a secondary key?
A.1
B.2
C.20
D.40
Correct:C
Microsoft MB7-514 MB7-514 examen MB7-514 MB7-514
NO.18 When you create a table relation, which characteristic must be true of the table specified by the
table ID?
A.The field ID specified must be part of the primary key.
B.The table must be a master table.
C.The table must not contain any records.
D.The primary key must be a code data type.
Correct:A
Microsoft MB7-514 MB7-514 examen MB7-514 MB7-514
NO.19 Key Groups are used to:
A.Allow keys to have a group of fields containing more than one field.
B.Define the group of reports that use a key in a table.
C.Activate and deactivate a seldom used group of keys.
D.Associate a group of keys with a report.
Correct:C
Microsoft MB7-514 MB7-514 examen MB7-514 MB7-514
NO.20 In a standard Microsoft Dynamics NAV Functional Area, describe the table relationship(s)
between a Master table and the corresponding Ledger table.
A.A field in the Master Table is table-related to the Ledger Table.
B.A field in the Ledger Table is table-related to the Master Table.
C.The Master Table and the Ledger Table each have a field that is table-related to the other.
D.The Ledger Table and the Master Table do not have any fields that are table-related to the other at all.
Correct:B
Microsoft MB7-514 MB7-514 examen MB7-514 MB7-514
Dans ce monde d'informatique, l'industrie IT est suivi par de plus en plus de ges. Dans ce domaine demandant beaucoup de techniques, il faut des Certificat à se preuver les techniques professionnelle. Les Certificats IT sont improtant pour un interviewé pendant un entretien. C'est pas facile à passer le test Microsoft MB7-514, donc c'est pourquoi beaucoup de professionnels qui choisissent ce Certificat pour se preuver.
没有评论:
发表评论